UTL Gamma Plus MPPT Solar Inverter 2 kVA /24 Volt
If your backup needs are less and want to go with single battery solution, 24 Volt variant of Gamma+ solar inverter would be better choice for you. Product specifications are as below:
Brand | utl |
Operating Temperature | 0 to 50 deg C |
Load | 7 Fan, 3 CFL,1 TV, 1 Refrigerator & 1 Cooler |
Switch Type | MOSFET |
Dimensions | 15x54x63 cm |
Technology Used | rMPPT |
Material | Iron |
Battery Type | Tubular |
Weight | 34 kg |
Cooling System | Fan |
Noise Level | 50 dB |
Type | Pure Sine Wave Inverter
Mode: Smart, PCU & Hybrid |
Change Over Time | 5 ms
Voltage: 60 ms |
Battery Backup | 8 hr |
Display Type | Digital |
Overload | 350:20 ms |
Efficiency | 85% |
Voltage | Input: 24 V DC
Output: 220 V ± 8% Low Cut: 100 ± 10 V Low Cut Recovery: 110 ± 10 V High Cut: 290 ± 10 V & High Cut Recovery: 2900 ± 10 V |
Model | Gamma PCU 224 |
Frequency | 50 Hz |
Mounting type | Table |
Power | 2 kVA |
Key Features
Controller based Design, Pure Sine Wave Built in rMPPT Charge Controller
MPPT is a technique used with photovoltaic(PV) solar systems to maximize power extraction under all conditions.
rMPPT, or maximum power point tracker is an electronic DC to DC converter that optimizes the match between the solar array (PV panels), and the battery bank. To put it simply, they convert a higher voltage DC output from solar panels down to the lower voltage needed to charge batteries.
LCD Display
Gamma+ is available with LCD, for better user interface. It shows battery voltage, charging current, output voltage , output frequency, output load percentage, Input voltage, Input frequency, solar voltage, solar current & consume solar power. It has four switches to configure Operational mode – Grid charger, IT Load, Smf/Tub, boost charging & mode selection.
User Configurable by LCD
All the parameters like battery charging voltage, battery high cut, battery low cut, battery charging current can be adjusted manually by the user as per their choice or requirement.
Charging Multi Stage (Bulk, Absorption & Float) Auto Equalize
To increase the life of battery maintain the gravity and temperature and to increase the backup of battery we use the stages of charging and equalize automatically in a month.
Compatible with DG as an input Source
The frequency of DG output is a very vital parameter that always varies. And if the system is in DG enable mode then the system will be compatible to take any of the frequency as the input source frequency.
Compatible with IT Load
IT mode is used for IT loads which provide protections to IT instruments like computers, printers etc. In IT mode the change over time is very less so that there should not any kind of breakdown in power supply.
Operating Mode Selection
PCU Mode – Priority Solar →Battery → Grid
Smart Mode – Priority Solar → Grid → Battery
Hybrid Mode – Priority for load Grid →Solar →Battery,
Priority for battery charging Solar → Grid
rMPPT का मतलब होता है, Rapid Maximum Power Point Technology. सूर्य की रौशनी के अनुसार सुबह से शाम तक Solar Panel की Voltage कम या ज़्यादा होती रहती है। हर समय Solar Panel की Voltage के हिसाब से कौन सी Output Voltage पर सबसे ज़्यादा Power मिलेगी, यह लगातार देखते रहने और उसी के अनुरूप उसको बदलते रहने की ज़रूरत होती है। यही काम rMPPT Technology बख़ूबी करती है। सुबह से शाम तक अगर ये Tracking अच्छे से हो जाये तो 30% तक ज़्यादा Solar Energy मिल जाती है।
Reviews
There are no reviews yet.