12V Gamma+ Solar Inverter
\nIf your backup needs are less and want to go with single battery solution, 12 Volt variant of
Gamma+ solar inverter would be better choice for you. Product specifications are as below:
\n
\n
\n
\n| Particular |
\nDescriptions |
\n
\n
\n| Capacity |
\n1 KVA / 12 Volt |
\n
\n
\n| Model |
\nGamma+ 1000VA/12 VDC |
\n
\n
\n| Inbuilt charge controller |
\nMppt |
\n
\n
\n| Solar panel support |
\n1000 watt |
\n
\n
\n| Max. PV voltage |
\n45 volt |
\n
\n
\n| Battery Support |
\n1 Battery 12 Volt |
\n
\n
\n| Battery Types Support |
\nSMF, Gel & Tubular |
\n
\n
\n| Display type |
\nLCD |
\n
\n
\n| Technology |
\nPure Sine Wave |
\n
\n
\n| Frequency |
\n50 to 60Hz |
\n
\n
\n| Priority |
\nSelection - PCU, Smart & Hybrid for Saving Energy and Money |
\n
\n
\n
\n
\n
Key Features
\n
\n
Controller based Design, Pure Sine Wave Built in rMPPT Charge Controller
\nMPPT is a technique used with photovoltaic(PV) solar systems to maximize power extraction under all conditions.
\nrMPPT, or maximum power point tracker is an electronic DC to DC converter that optimizes the match between the solar array (PV panels), and the battery bank. To put it simply, they convert a higher voltage DC output from solar panels down to the lower voltage needed to charge batteries.
\n
\n
\n
\n
LCD Display
\nGamma+ is available with LCD, for better user interface. It shows battery voltage, charging current, output voltage , output frequency, output load percentage, Input voltage, Input frequency, solar voltage, solar current & consume solar power. It has four switches to configure Operational mode – Grid charger, IT Load, Smf/Tub, boost charging & mode selection.
\n
\n
\n
\n
User Configurable by LCD
\nAll the parameters like battery charging voltage, battery high cut, battery low cut, battery charging current can be adjusted manually by the user as per their choice or requirement.
\n
\n
\n
\n
Charging Multi Stage (Bulk, Absorption & Float) Auto Equalize
\nTo increase the life of battery maintain the gravity and temperature and to increase the backup of battery we use the stages of charging and equalize automatically in a month.
\n
\n
\n
\n
Compatible with DG as an input Source
\nThe frequency of DG output is a very vital parameter that always varies. And if the system is in DG enable mode then the system will be compatible to take any of the frequency as the input source frequency.
\n
\n
\n
\n
Compatible with IT Load
\nIT mode is used for IT loads which provide protections to IT instruments like computers, printers etc. In IT mode the change over time is very less so that there should not any kind of breakdown in power supply.
\n
\n
\n
\n
Operating Mode Selection
\nPCU Mode – Priority Solar →Battery → Grid
\nSmart Mode – Priority Solar → Grid → Battery
\nHybrid Mode – Priority for load Grid →Solar →Battery,
\nPriority for battery charging Solar → Grid
\n
\n
\nrMPPT का मतलब होता है, Rapid Maximum Power Point Technology. सूर्य की रौशनी के अनुसार सुबह से शाम तक Solar Panel की Voltage कम या ज़्यादा होती रहती है। हर समय Solar Panel की Voltage के हिसाब से कौन सी Output Voltage पर सबसे ज़्यादा Power मिलेगी, यह लगातार देखते रहने और उसी के अनुरूप उसको बदलते रहने की ज़रूरत होती है। यही काम rMPPT Technology बख़ूबी करती है। सुबह से शाम तक अगर ये Tracking अच्छे से हो जाये तो 30% तक ज़्यादा Solar Energy मिल जाती है।
