Solar PCU Nxt+ 3.75 kVA /48 Volt offgrid hybrid Inverter NXT3.75 KVA

Luminous Solar PCU NXT+ 3.75KVA, 48V Inverter

Features:

Rated AC power - 230V, 13A, Single phase
Max Supported Panel Power - 3000 Wp,
Input Voltage Range (Vmp) - 65-130V
Charge Controller - MPPT,
Input Voltage 80-165 Voc
Nominal Battery Bank Voltage - 48V
Intelligent system with 32 bit DSP Controller which enables it to handle multiple algorithms efficiently
Inbuilt MPPT charge controller extracts upto 30% more power from Panels Inbuilt isolation transformer to protect from grid surges and noise
Selectable source priority: Choose source priority from solar, battery and grid
User friendly Informative LCD Display for time charging, Supply etc
Dual MCB protection against short circuit protection for AC and DC
Safe for your home with comprehensive protection features such as short-circuit, reverse polarity, battery over-charge and battery deep-discharge.
Pure sine wave output for safety and noiseless operation of connected appliances.
Compliance to most of the National & International standards for safety and efficiency and reliability, such as IEC - 61683, IEC - 60068 - 1,2,14,30, IEC - 60529

Descriptions

Capacity	3 kW / 3.75 kVA
Technology	Pure sine wave, Mppt (latest)
Power Load	up to 3 kW mix of 1 ton Inverter AC, Home appliances such as Light, fan, TV, Laptop, refrigerator and water motor
Batteries required	4 nos. (100 - 200 Ah)

Technicals

Technology	Sine wave
Solar panel current	46 amps
Solar panel voltage (VOC)	65 V - 130 V
Charger technology	MPPT
Full Battery Recharge Time	10-12 Hrs

Inverter monitoring – Display

\nLuminous solar PCU inverters are made with customer friendly monitoring system, there are two kinds of display in inverters to monitor functioning of solar power conditioning units.

Led display

Grid led (green) – grid power is available

PV led (green) – solar is available

Inverter led (green) – inverter is switched on

Battery led (green)- battery charging (blinking) / battery discharging (led steady),

Fault led (red) – inverter is faulty

Lcd display

Battery voltage – charge level of battery

Load % - power consumption as a % of total inverter power

Output voltage

PV voltage – solar panel generating voltage

PV current – solar panel generating power in amps

Grid voltage – utility grid voltage level

Grid charging current – amp with which battery is being charged

Electricity saved - kwh

User Manual

Download user manual and data sheet to understand how to install the solar inverter and in case of faults how to trouble shoot.

Luminous Solar PCU NXT+ 3.75KVA, 48V Solar Inverter Luminous Solar PCU NXT+ 3.75KVA, 48V Solar Inverter